PCB – Golb.be

QRP Labs QCX – CAT & Key Interface – Released

Participate in contests with ease with your QCX. Use N1MM+ to log your contacts and to send signal reports. With…

Using the CAT interface of the QCX it was already possible to retrieve it’s frequency in N1MM. I made great…

I released the project files of the Icom External Keypad V1.21. You can find them on the Icom External Keypad…

The 8 pin screw connector finally arrived, so last weekend I took some time to assemble the 4 remaining PCB’s…

As I mentioned in my previous post, there were some things that could be improved about the IC-7300 External Keyboard.…

Last week, all but one of the parts to assemble the IC-7300 external keyboard arrived. The missing part is the…

In March 2019 I already made an external keyboard for the IC-7300 in an aluminum enclosure. You can read that…

When our first batch of automatic magnetic loop tuners was finished, I started looking for another enclosure. One that was…

Everything you need to build the automatic magnetic loop tuner in just one picture. On the Flickr page, you can…

There are about 10 working days between finishing the PCB design in Eagle and the reception of the finished product…

I took some time to solder another PCB for an Automatic Magnetic Loop Tuner. I made some pictures of the…

Using the original schematic as a starting point, I reworked the electrical diagram and incorporated an A4988/DRV8825 module. You can…